+ NVAPI_EXPECTED_LOGICAL_GPU_HANDLE = -100, // Expected a logical GPU handle for one or more parameters
+ NVAPI_EXPECTED_PHYSICAL_GPU_HANDLE = -101, // Expected a physical GPU handle for one or more parameters
+ NVAPI_EXPECTED_DISPLAY_HANDLE = -102, // Expected an NV display handle for one or more parameters
+ NVAPI_INVALID_COMBINATION = -103, // The combination of parameters is not valid.
+ NVAPI_NOT_SUPPORTED = -104, // Requested feature is not supported in the selected GPU
+ NVAPI_PORTID_NOT_FOUND = -105, // No port ID was found for the I2C transaction
+ NVAPI_EXPECTED_UNATTACHED_DISPLAY_HANDLE = -106, // Expected an unattached display handle as one of the input parameters.
+ NVAPI_INVALID_PERF_LEVEL = -107, // Invalid perf level
+ NVAPI_DEVICE_BUSY = -108, // Device is busy; request not fulfilled
+ NVAPI_NV_PERSIST_FILE_NOT_FOUND = -109, // NV persist file is not found
+ NVAPI_PERSIST_DATA_NOT_FOUND = -110, // NV persist data is not found
+ NVAPI_EXPECTED_TV_DISPLAY = -111, // Expected a TV output display
+ NVAPI_EXPECTED_TV_DISPLAY_ON_DCONNECTOR = -112, // Expected a TV output on the D Connector - HDTV_EIAJ4120.
+ NVAPI_NO_ACTIVE_SLI_TOPOLOGY = -113, // SLI is not active on this device.
+ NVAPI_SLI_RENDERING_MODE_NOTALLOWED = -114, // Setup of SLI rendering mode is not possible right now.
+ NVAPI_EXPECTED_DIGITAL_FLAT_PANEL = -115, // Expected a digital flat panel.
+ NVAPI_ARGUMENT_EXCEED_MAX_SIZE = -116, // Argument exceeds the expected size.
+ NVAPI_DEVICE_SWITCHING_NOT_ALLOWED = -117, // Inhibit is ON due to one of the flags in NV_GPU_DISPLAY_CHANGE_INHIBIT or SLI active.
+ NVAPI_TESTING_CLOCKS_NOT_SUPPORTED = -118, // Testing of clocks is not supported.
+ NVAPI_UNKNOWN_UNDERSCAN_CONFIG = -119, // The specified underscan config is from an unknown source (e.g. INF)
+ NVAPI_TIMEOUT_RECONFIGURING_GPU_TOPO = -120, // Timeout while reconfiguring GPUs
+ NVAPI_DATA_NOT_FOUND = -121, // Requested data was not found
+ NVAPI_EXPECTED_ANALOG_DISPLAY = -122, // Expected an analog display
+ NVAPI_NO_VIDLINK = -123, // No SLI video bridge is present
+ NVAPI_REQUIRES_REBOOT = -124, // NVAPI requires a reboot for the settings to take effect
+ NVAPI_INVALID_HYBRID_MODE = -125, // The function is not supported with the current Hybrid mode.
+ NVAPI_MIXED_TARGET_TYPES = -126, // The target types are not all the same
+ NVAPI_SYSWOW64_NOT_SUPPORTED = -127, // The function is not supported from 32-bit on a 64-bit system.
+ NVAPI_IMPLICIT_SET_GPU_TOPOLOGY_CHANGE_NOT_ALLOWED = -128, // There is no implicit GPU topology active. Use NVAPI_SetHybridMode to change topology.
+ NVAPI_REQUEST_USER_TO_CLOSE_NON_MIGRATABLE_APPS = -129, // Prompt the user to close all non-migratable applications.
+ NVAPI_OUT_OF_MEMORY = -130, // Could not allocate sufficient memory to complete the call.
+ NVAPI_WAS_STILL_DRAWING = -131, // The previous operation that is transferring information to or from this surface is incomplete.
+ NVAPI_FILE_NOT_FOUND = -132, // The file was not found.
+ NVAPI_TOO_MANY_UNIQUE_STATE_OBJECTS = -133, // There are too many unique instances of a particular type of state object.
+ NVAPI_INVALID_CALL = -134, // The method call is invalid. For example, a method's parameter may not be a valid pointer.
+ NVAPI_D3D10_1_LIBRARY_NOT_FOUND = -135, // d3d10_1.dll cannot be loaded.
+ NVAPI_FUNCTION_NOT_FOUND = -136, // Couldn't find the function in the loaded DLL.
+ NVAPI_INVALID_USER_PRIVILEGE = -137, // Current User is not Admin.
+ NVAPI_EXPECTED_NON_PRIMARY_DISPLAY_HANDLE = -138, // The handle corresponds to GDIPrimary.
+ NVAPI_EXPECTED_COMPUTE_GPU_HANDLE = -139, // Setting Physx GPU requires that the GPU is compute-capable.
+ NVAPI_STEREO_NOT_INITIALIZED = -140, // The Stereo part of NVAPI failed to initialize completely. Check if the stereo driver is installed.
+ NVAPI_STEREO_REGISTRY_ACCESS_FAILED = -141, // Access to stereo-related registry keys or values has failed.
+ NVAPI_STEREO_REGISTRY_PROFILE_TYPE_NOT_SUPPORTED = -142, // The given registry profile type is not supported.
+ NVAPI_STEREO_REGISTRY_VALUE_NOT_SUPPORTED = -143, // The given registry value is not supported.
+ NVAPI_STEREO_NOT_ENABLED = -144, // Stereo is not enabled and the function needed it to execute completely.
+ NVAPI_STEREO_NOT_TURNED_ON = -145, // Stereo is not turned on and the function needed it to execute completely.
+ NVAPI_STEREO_INVALID_DEVICE_INTERFACE = -146, // Invalid device interface.
+ NVAPI_STEREO_PARAMETER_OUT_OF_RANGE = -147, // Separation percentage or JPEG image capture quality is out of [0-100] range.
+ NVAPI_STEREO_FRUSTUM_ADJUST_MODE_NOT_SUPPORTED = -148, // The given frustum adjust mode is not supported.
+ NVAPI_TOPO_NOT_POSSIBLE = -149, // The mosaic topology is not possible given the current state of the hardware.
+ NVAPI_MODE_CHANGE_FAILED = -150, // An attempt to do a display resolution mode change has failed.
+ NVAPI_D3D11_LIBRARY_NOT_FOUND = -151, // d3d11.dll/d3d11_beta.dll cannot be loaded.
+ NVAPI_INVALID_ADDRESS = -152, // Address is outside of valid range.
+ NVAPI_STRING_TOO_SMALL = -153, // The pre-allocated string is too small to hold the result.
+ NVAPI_MATCHING_DEVICE_NOT_FOUND = -154, // The input does not match any of the available devices.
+ NVAPI_DRIVER_RUNNING = -155, // Driver is running.
+ NVAPI_DRIVER_NOTRUNNING = -156, // Driver is not running.
+ NVAPI_ERROR_DRIVER_RELOAD_REQUIRED = -157, // A driver reload is required to apply these settings.
+ NVAPI_SET_NOT_ALLOWED = -158, // Intended setting is not allowed.
+ NVAPI_ADVANCED_DISPLAY_TOPOLOGY_REQUIRED = -159, // Information can't be returned due to "advanced display topology".
+ NVAPI_SETTING_NOT_FOUND = -160, // Setting is not found.
+ NVAPI_SETTING_SIZE_TOO_LARGE = -161, // Setting size is too large.
+ NVAPI_TOO_MANY_SETTINGS_IN_PROFILE = -162, // There are too many settings for a profile.
+ NVAPI_PROFILE_NOT_FOUND = -163, // Profile is not found.
+ NVAPI_PROFILE_NAME_IN_USE = -164, // Profile name is duplicated.
+ NVAPI_PROFILE_NAME_EMPTY = -165, // Profile name is empty.
+ NVAPI_EXECUTABLE_NOT_FOUND = -166, // Application not found in the Profile.
+ NVAPI_EXECUTABLE_ALREADY_IN_USE = -167, // Application already exists in the other profile.
+ NVAPI_DATATYPE_MISMATCH = -168, // Data Type mismatch
+ NVAPI_PROFILE_REMOVED = -169, // The profile passed as parameter has been removed and is no longer valid.
+ NVAPI_UNREGISTERED_RESOURCE = -170, // An unregistered resource was passed as a parameter.
+ NVAPI_ID_OUT_OF_RANGE = -171, // The DisplayId corresponds to a display which is not within the normal outputId range.
+ NVAPI_DISPLAYCONFIG_VALIDATION_FAILED = -172, // Display topology is not valid so the driver cannot do a mode set on this configuration.
+ NVAPI_DPMST_CHANGED = -173, // Display Port Multi-Stream topology has been changed.
+ NVAPI_INSUFFICIENT_BUFFER = -174, // Input buffer is insufficient to hold the contents.
+ NVAPI_ACCESS_DENIED = -175, // No access to the caller.
+ NVAPI_MOSAIC_NOT_ACTIVE = -176, // The requested action cannot be performed without Mosaic being enabled.
+ NVAPI_SHARE_RESOURCE_RELOCATED = -177, // The surface is relocated away from video memory.
+ NVAPI_REQUEST_USER_TO_DISABLE_DWM = -178, // The user should disable DWM before calling NvAPI.
+ NVAPI_D3D_DEVICE_LOST = -179, // D3D device status is D3DERR_DEVICELOST or D3DERR_DEVICENOTRESET - the user has to reset the device.
+ NVAPI_INVALID_CONFIGURATION = -180, // The requested action cannot be performed in the current state.
+ NVAPI_STEREO_HANDSHAKE_NOT_DONE = -181, // Call failed as stereo handshake not completed.
+ NVAPI_EXECUTABLE_PATH_IS_AMBIGUOUS = -182, // The path provided was too short to determine the correct NVDRS_APPLICATION
+ NVAPI_DEFAULT_STEREO_PROFILE_IS_NOT_DEFINED = -183, // Default stereo profile is not currently defined
+ NVAPI_DEFAULT_STEREO_PROFILE_DOES_NOT_EXIST = -184, // Default stereo profile does not exist
+ NVAPI_CLUSTER_ALREADY_EXISTS = -185, // A cluster is already defined with the given configuration.
+ NVAPI_DPMST_DISPLAY_ID_EXPECTED = -186, // The input display id is not that of a multi stream enabled connector or a display device in a multi stream topology
+ NVAPI_INVALID_DISPLAY_ID = -187, // The input display id is not valid or the monitor associated to it does not support the current operation
+ NVAPI_STREAM_IS_OUT_OF_SYNC = -188, // While playing secure audio stream, stream goes out of sync
+ NVAPI_INCOMPATIBLE_AUDIO_DRIVER = -189, // Older audio driver version than required
+ NVAPI_VALUE_ALREADY_SET = -190, // Value already set, setting again not allowed.
+ NVAPI_TIMEOUT = -191, // Requested operation timed out
+ NVAPI_GPU_WORKSTATION_FEATURE_INCOMPLETE = -192, // The requested workstation feature set has incomplete driver internal allocation resources
+ NVAPI_STEREO_INIT_ACTIVATION_NOT_DONE = -193, // Call failed because InitActivation was not called.
+ NVAPI_SYNC_NOT_ACTIVE = -194, // The requested action cannot be performed without Sync being enabled.
+ NVAPI_SYNC_MASTER_NOT_FOUND = -195, // The requested action cannot be performed without Sync Master being enabled.
+ NVAPI_INVALID_SYNC_TOPOLOGY = -196, // Invalid displays passed in the NV_GSYNC_DISPLAY pointer.
+ NVAPI_ECID_SIGN_ALGO_UNSUPPORTED = -197, // The specified signing algorithm is not supported. Either an incorrect value was entered or the current installed driver/hardware does not support the input value.
+ NVAPI_ECID_KEY_VERIFICATION_FAILED = -198, // The encrypted public key verification has failed.
+ NVAPI_FIRMWARE_OUT_OF_DATE = -199, // The device's firmware is out of date.
+ NVAPI_FIRMWARE_REVISION_NOT_SUPPORTED = -200, // The device's firmware is not supported.
+} NvAPI_Status;